EC000 Custom Color, FRC High-Build (Flexible Rubber Coating with Vulcanized Rubber Aggregate), 3.5 Gallon

FRC Series Overview

FRC High-Build – Designed for use on damaged wood and concrete. This formula contains 50–60 mesh vulcanized rubber aggregate to increase thickness and help fill cracks or other surface damage. Multiple layers can be applied to build mil thickness and achieve a more even surface. For a smoother finish texture, FRC High-Build can then be top-coated with FRC Smooth.

FRC Smooth – Rubberized coating which can be used as a topcoat over FRC High-Build to achieve a smoother and less textured surface. It can be applied as a standalone coating to properly prepared wood, concrete, and primed metal substrates. FRC provides surface protection, water proofing, and slip resistance.

FRC Patch - Patching compound for use with FRC High-Build. Use for filling holes, cracks, chips and other damaged areas. Apply a primer coat of FRC High Build to seal the surface before patching. Do not apply directly to raw wood or concrete. Always allow ample time to dry before coating. As a rule of thumb, mix FRC Patching Compound with FRC High-Build in a 1:1 ratio by volume. Apply with a trowel or putty knife. Mix only what you can use in 10 minutes.

Vulcanized Rubber Aggregate – A granulated rubber product used in our FRC High-Build formula. Contractors who require more control over the amount of aggregate in the FRC coating can purchase the rubber aggregate separately and adjust the mix to meet specific project requirements.

Endura-Plate – An extremely durable multi-surface coating and sealant which can be used as a final topcoat over FRC products to reduce dirt pickup, enhance durability, and provide a hard, glossy finish. Endura-Plate top coat is always recommended for surfaces that require cleaning (sweeping, mopping, etc.) It can also be applied as a stand-alone coating on a wide variety of surfaces without the need for an FRC rubberized base and is an available in tinted or clear finishes.

** Note - As standalone coatings, FRC High Build and FRC Smooth will have a low sheen and slip resistant finish.
** Note - Apply Endura-Plate over FRC products for improved durability and cleanability. Endura-Plate will have a hard, glossy finish, but may be slippery when wet.

FRC Application Examples

Heavy Damage , Interior Hallway Floors (large/deep chips and cracks that need patching)

Medium Damage, Interior Hallway Floors (shallow/surface level damage that does not require patching)

Heavy Damage, Exterior Deck Waterproofing (large/deep chips and cracks that need patching)

All technical advice, recommendations and services are rendered by the All From 1 Supply gratis. They are based on technical data which All From 1 Supply believes to be reliable, and are intended for professional use by persons having skill and know-how at their own discretion and risk. All From 1 Supply assumes no responsibility for results obtained or damages incurred from their use by the buyer in whole or in part. Published technical data and instructions are subject to change without notice.