FRC High-Build - Designed for use on damaged wood and concrete. This formula contains 50-60 mesh vulcanized rubber aggregate to increase thickness and help fill cracks or other surface damage. Multiple layers can be applied to build mil thickness and achieve a more even surface. For a smoother finish texture, FRC High-Build can then be top-coated with FRC Smooth. | View Product |

FRC Smooth - Rubberized coating which can be used as a topcoat over FRC High-Build to achieve a smoother and less textured surface. It can be applied as a standalone coating to properly prepared wood, concrete, and primed metal substrates. FRC provides surface protection, water proofing, and slip resistance. | View Product |

FRC Patch - Patching compound for use with FRC High-Build. Use for filling holes, cracks, chips and other damaged areas. Apply a primer coat of FRC High Build to seal the surface before patching. Do not apply directly to raw wood or concrete. Always allow ample time to dry before coating. As a rule of thumb, mix FRC Patching Compound with FRC High-Build in a 1:1 ratio by volume. Apply with a trowel or putty knife. Mix only what you can use in 10 minutes. | View Product |

Vulcanized Rubber Aggregate - A granulated rubber product used in our FRC High-Build formula. Contractors who require more control over the amount of aggregate in the FRC coating can purchase the rubber aggregate separately and adjust the mix to meet specific project requirements. | View Product |

Endura-Plate - An extremely durable multi-surface coating and sealant which can be used as a final topcoat over FRC products to reduce dirt pickup, enhance durability, and provide a hard, glossy finish. Endura-Plate top coat is always recommended for surfaces that require cleaning (sweeping, mopping, etc.) It can also be applied as a stand-alone coating on a wide variety of surfaces without the need for an FRC rubberized base and is an available in tinted or clear finishes. | View Product |