EC800 GS Blue, Imron 2.1 HG-D Gloss, 1.2 Gallon Kit

Imron 2.1 HG-D+ is a 2.1 lb/gal (250 g/l) VOC compliant, two-component, low HAPS, acrylic polyurethane DTM designed to feature high gloss, high build and good topcoat appearance as a very durable, one-step system suitable for non-corrosive exposures and select harsh environments. It may be applied by brush, roll or spray.

1.2 Gallon Kit Includes:

• 1 Gallon of Imron 2.1 HG-D+ Paint
• 1 80% Full Quart of 9T00-A Activator

PERFORMANCE PROPERTIES

• Abrasion & Mechanical Excellent
• Alkalis Excellent
• Humidity Excellent
• Solvents Excellent
• Color & Gloss Retention Excellent
• Acids Excellent
• Salts Excellent
• Weather Excellent

SUGGESTED USES:

On hot rolled carbon steel, weathered and properly treated galvanized, aluminum, dry wall,
and wood where:

• A one-step DTM (direct-to-metal) application is desired
• High build either as a DTM or high build topcoat is desired
• Outstanding DTM color and gloss retention are required
• Excellent adhesion and flexibility are desired
• Application by brush and roller, in addition to spraying, may be necessary
• Application to 35°F may be required
• Excellent hiding is needed

NOT RECOMMENDED FOR:

• Immersion service or floors
• Severely corrosive environments (as a one coat system)

COMPATIBILITY WITH OTHER COATINGS

• DTM (direct-to-metal) over properly prepared: aluminum, hot rolled carbon steel, and
  weathered galvanized surfaces, in non-corrosive exposures and selected harsher
  environments.
• Over most aged and hard cured coatings in good condition. Testing for lifting, bubbling and
  adhesion is recommended to assure compatibility with unknown coatings. For more
  protection, Imron 2.1 HG-D + Topcoat can also be used over properly primed surfaces in
  exterior exposures.
• Recommended primers: Imron 2.8 PR, Imron 2.1 PR, Tufcote™ 3.3 PR, Tufcote 3.5 PR,
  Corlar® 2.1 PR, Corlar 2.1 PR-P, and Corlar 2.8PR.