EC000 Custom Color, Premier Pro

FOR USE ON:

• Interior Walls
• Exterior Walls
• Wood
• Plywood
• Primed Metal
• Concrete
• Shingles

See application guide for additional details

PRODUCT BENEFITS:

• Interior/Exterior
• Excellent Color & Gloss Retention
• Water Clean Up
• Resists Chalking
• Excellent Adhesion
• Quick Dry
• Environmentally Friendly
• Low-VOC

Coverage: Approx. 300-400 sq.ft. per gallon. Rates will vary based on substrate, mil thickness and the painter’s application technique.

Dry Time: At 50% relative humidity and temperature of 77°F average dry time is 1 hour. Recoat in 2 hours. Average time to full cure is 7 days.

Application Conditions: No reduction needed. Use at temperatures above 50 degrees F. Apply with airless sprayer, brush or roller to clean surface. Remove dust, dirt and grease prior to application. Do not apply if the application surface or ambient temperature is below 50°F (10°C) or above 100°F (38°C), or if the atmospheric temperature is within 5°F of the dew point. Relative humidity should be below 90%. Don't apply when there is a risk of rain or freezing temperatures within 12 hours after application. Don't apply within 2 hours of sunset if the temperature is below 60 degrees.

Storage: Store above 40 degrees F in a dry area and protect from extreme temperatures and direct sunlight. Product will not recover from freezing.

Health & Safety: Use with adequate ventilation. Approved respirator will reduce irritation. Wear safety goggles during application. If eye contact occurs, flush with water and consult physician This product is not considered hazardous under current regulations and is not manufactured using substances listed under Section 611 of the CleanAir Act.

Clean up: Clean up with warm water and soap. Clean up spills promptly with suitable absorbent material and dispose of in accordance with local, state of federal regulations.