click to enlarge
Vinyl Roll Door Bottom Seal, 3", Flat 'T' Ends
- High-quality vinyl astragal series
- Universal 1/4" "T" that fits many popular retainers
Not sure if this is the right seal? Visit the sample page!
As low as $0.45 per linear foot. 'As low as price' is based on least expensive linear/foot price result when dividing price/total feet. Usually this is the largest roll.
Flat Door Seal
1/4" 'T' connector on each end
High-quality vinyl astragal designed for best performance.
- Width: 3"
- Color: Black
- 'T' Connector Width: 1/4"
- Available in 4.5ft to 200ft rolls.
How To Install New Weather Seal / Bottom SealGeneral guidelines for installing new weather seal
- Remove old bottom seal -use needle-nose plier and/or lubricant if it doesn't come out easily
- Clean the retainer taking time to straighten any crushed or pinched areas that might make it difficult to slide in the new weather seal
- Using an appropriate lubricant like Zenex SuperLube, spray the seal track to make it easier pull the new seal along
- Line up the new seal, insert and work it along the track taking care not to exert more force than needed which may stretch or damage the seal.
- Trim excess seal as needed and lightly crimp the track ends to keep the weather stripping from 'crawling' with the expansion and contraction of the door seal and track due to temperature changes