

Previous Product
Next Product
Door Restore Express (Clear):
Door Restore Express, Clear Gloss, Aerosol, 11oz
Door Restore Express, Clear Gloss, Aerosol, 11oz
Fast drying high gloss clear coat in convenient aerosol can. Tack free in 5 to 15 minutes and is the best way to quickly restore shine to your faded and chalking doors.

ITEM: EC-0301-SPR
Price: $10.99
Door Restore Express is the easiest way to restore color and shine to faded and chalky doors when the color layer is still intact. Convenient aerosol spray size. Tack free in 5 to 15 minutes.
Door Restore Express, Aerosol, 11oz
Restores Lustre to Chalky & Faded Doors
This product is designed to be applied as a quick, easy, and relatively inexpensive routine maintenance coating every few years to keep the doors at a "like new" appearance. Depending on a customer's expectation of appearance, the environment, the direction the doors face and other factors the time between recoating can be be from 3-4 years to 8-9 years. Except in the case of the most extreme environments you could expect to reapply on average no more frequently than every 5-6 years to keep that "like new" look. Longer durations will see progressive loss of shine and eventually chalking. It would be best to recoat before chalking starts as 'chalk' is oxidized paint which means you are 'eating' your color layer. The result is more extensive surface preparation to remove the chalking and possibly even the need to repaint before clear coating.
Door Restore Express is a
“self healing” type of coating which means the coating “melts” itself.
Runs, drips, and sags can be removed using a soft cloth saturated with
acetone. Repairs can then easily be done with a brush or a spray can.
Future coats can be applied right on top after a simple cleaning, no
need for extensive surface preparation.
- Easy to use - clear one step coating
- Protects - extends the life of the door with UV inhibitors
- Extensible - reapply as needed to restore shine and protection.
- Self-Healing - brush out drips and imperfections with a new coat
- Fast Drying - for quick return to service
This product is designed to be applied as a quick, easy, and relatively inexpensive routine maintenance coating every few years to keep the doors at a "like new" appearance. Depending on a customer's expectation of appearance, the environment, the direction the doors face and other factors the time between recoating can be be from 3-4 years to 8-9 years. Except in the case of the most extreme environments you could expect to reapply on average no more frequently than every 5-6 years to keep that "like new" look. Longer durations will see progressive loss of shine and eventually chalking. It would be best to recoat before chalking starts as 'chalk' is oxidized paint which means you are 'eating' your color layer. The result is more extensive surface preparation to remove the chalking and possibly even the need to repaint before clear coating.
DO NOT USE strong solvents such as lacquer thinner or acetone to clean doors treated Door Restore Express as it can damage the surface. If surface damage does occur just touch up with a brush or a spray can.
Surface Preparation:
Remove all dust, dirt, grime, and chalk using Zap-It Chalk & Grime Buster.
(PH neutral cleaners such as “Simple Green” do not break down the
chalk and require substantially more physical scrubbing). Apply per
label directions. If necessary hand clean with an extra fine abrasive
pad to remove any remaining embedded chalk and wipe the surface dust
free.
Touch-up any scratches or other damage with “Endura-Clad touch-up paint.
Product Application:
Clean-Up: Can be cleaned up with acetone.
Conditions: Apply when surface and air temperature are between 60°F and 100° F. Do not apply when there is a risk of rain or if the atmospheric temperature is with 5°F of the dew point. Avoid applying in direct sunlight when the atmospheric temperature is above 80° F.
Application: Door Restore Express Aerosol is designed to be applied in 2 or more thin coats. At least two coats are required and for longer durability a 3rd coat is recommended. After the first coat scratches on the color layer may be more visible. Use our Spray Touch-Up paint to repair those before applying a second coat.
Dry Time: 5 - 15 minutes to touch and recoat, 30-45 minutes to handle.
Documents & Resources
- Product Sell Sheet
- Application Guidelines
- Safety Data Sheet (SDS)
- Technical Data Sheet (TDS)
- Site Blog
Browser blocking the pop-up? Try right clicking on the link and saving to your desktop, if that doesn't work just give us a call!