100059-03-GR DBCI Roll Door Weather Seal, 3/8" T, 1-1/8" Blade, Gray

(0)No Reviews yet

SKU: 100059-03-GR-KIT-WEB

24.5-ft Roll | 100059-03-GR-KIT24.5 | $0.78/unit - total: $19

200-ft Roll | 100059-03-GR-KIT200 | $0.70/unit - total: $140

400-ft Roll | 100059-03-GR-KIT400 | $0.65/unit - total: $260

“As Low As Price" is based on the lowest possible price per linear foot.

As low as $0.65

Quantity	Price

DBCI BLADE weatherstrip

used on M640 with a 3/8" ‘T’

How To Install New Weather Seal / Bottom Seal

General guidelines for installing new weather seal

Remove old bottom seal. Use needle-nose pliers and/or lubricant if it doesn't come out easily.
Clean the retainer taking time to straighten any crushed or pinched areas that might make it difficult to slide in the new weather seal.
Using an appropriate lubricant (like Zenex SuperLube), spray the seal track to make it easier pull the new seal along.
Line up the new seal, insert and work it along the track taking care not to exert more force than needed which may stretch or damage the seal.
Trim excess seal as needed and lightly crimp the track ends to keep the weather stripping from ‘crawling’. ‘Crawling’ is caused by the expansion and contraction of the door seal due to temperature changes.

Description